Cabinet Modules
The Lynx RX3 Full Cabinet consists of four, stacked modules. A module can be:
A clear door with three shelves (top two shelves are adjustable).
Four drawers.
An open compartment for the Lynx PC (only available to replace door #2).
Cabinet Size Specs
Full Cabinet size is 77.9" H x 28" W x 22" D and weighs 341 lbs.
Door module is 18" H x 23.5" W x 21" D (internal dimensions) and each Shelf has a 25 lb. capacity.
Each Drawer is 4" H x 23.1" W x 18.4" D (internal dimensions) with a 25 lb. capacity per drawer; however, all four drawers should not exceed 50 lbs. total.
The optional PC shelf attaches to the side of the cabinet to hold the Lynx PC, monitor, keyboard, mouse, and label printer. With the PC shelf, the total width of the cabinet is 52".
Connections, etc.
The cabinet power and USB connections are on the back of the cabinet in the bottom-right corner.
For troubleshooting purposes, there is a small, reset button on the front of the cabinet in the bottom-right corner.
The cabinet has four casters for moving the cabinet, with four adjustable feet for leveling and the stability of the cabinet once installed.
Full Cabinet Configurations
Standard Configuration (3 Doors & 4 Drawers)
The most common cabinet configuration includes three doors and four drawers, with doors #1 and #2 at the top, over drawers A, B, C, and D, with door #3 at the bottom.
4 Door Configuration
For locations that do not need drawers, the cabinet can be configured with four door modules.
Open Compartment Configuration
To decrease the footprint of the cabinet, door #2 can be replaced with an open compartment for housing the Lynx PC. With quite a bit less capacity, this configuration can include a drawer module (shown below) or three doors.
